Zenitsu Agatsuma Inspired PC Case (DIY): Materials Used Included

May 6, 2022 0

Zenitsu Agatsuma Inspired PC Case (DIY): Materials Used Included

Despite his low self-esteem, Zenitsu Agatsuma has always been known for his impressive physical strength and skill (When sleeping). While he may be annoying at times, there’s no denying that we all love this anime character!

If you’re a fan of Zenitsu Agatsuma like I am, why not create your own PC case inspired by his cool and tough look? With the right materials, tools, and know-how, you can easily make a custom case that reflects the spirit of Zenitsu Agatsuma.

Total expenses excluding the case: $53

Total expenses including the case: $113

Materials Used for this DIY Zenitsu Agatsuma PC Case

PC Case – DeepCool MACUBE 110

DeepCool MACUBE 110

To start off, you will need a white plain PC case. If you currently don’t have one. You can get the DeepCool MACUBE 110, which is currently listed on Amazon and Newegg for around $60. The Macube 110 is a great choice because it’s big enough to fit all your components but not too large that it takes up too much space on your desk. Although black or white will work, I recommend getting the black one, so the yellow accent sticker on the side panel of the case really pops.

Spray Paint – Yellow and Orange

You will need two spray paint colors for this project, yellow and orange. You can find these at your local hardware store for around less than $7 each. If you don’t know where to buy it, here are the links.

For yellow paint

For orange paint

For applying the paint, you check the youtube tutorial below on how to paint a fade effect using spray paint.

Important note: Make sure the fade hardness is not that hard or it will be too obvious.

Apply the paint to the front, right-side panel, and top. And once you’ve finished painting the case, put everything back together and proceed to the next step, which is putting the sticker.

Zenitsu Sticker

For this case, I’ve used two stickers. One for the front and one for the side panel. I’ve included the links where you can download them. It’s hard to find a sticker on the market that are similar to the ones I’ve used. So, I recommend finding a seller (our recommended seller) that can do a custom sticker with the correct size.

Note: Make sure you send the sticker dimensions to the vendor. I’ve included below the correct sticker dimensions (mm).

Stickers used in the side glass panel (download here):

Sticker dimensions: 242.71mm height, 325.26mm width

Stickers used in the front panel (download here):

Sticker dimensions: 118.89mm height, 100.54mm width

Zenitsu Sword

Zenitsu Nichirin Sword

This is Zenitsu’s nichirin sword. You can get this on Amazon, Shopee, or Lazada.

If you have questions, feel free to contact me directly using the website contact form, Twitter, or directly in Tiktok.

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments
© Copyright 2022 Fulogic Hardware. All rights reserved.
Would love your thoughts, please comment.x